Here we have our fitter Gary, carefully mixing and applying Flexi-Screed to the subfloor between two differing heights that the joiner could not level by conventional methods. Gary worked on this over three days, as following each application, you need to let this screed mix settle, dry and apply more primer before applying a second coat. This process continues until you achieve the desired levels.
Melrose Axminster was chosen from Wilton Carpets for both the Members Lounge and the Committee Room. Wilton Melrose Axminster carpet is designed and manufactured in the UK and is suitable for Heavy Contract Use. Due to the large size of the lounge, CarpetworksUK Ltd supplied and installed 5 widths of carpet using Silva-Seam tape at each join to ensure best finish and lasting seam. Using the inferior heat seam tape can and does lead to premature wear on seams.
Polysafe slip-resistant sheet vinyl was supplied and installed by CarpetworksUK - curved to the front of the spillage, following the line of the Bar, behind the Bar and also to the Bar spillage within the members Committee Room.
Area Behind Bar : Our fitters Gary and Jimmy installing Polysafe slip resistant sheet vinyl to behind the Bar within the Members Lounge. Luckily Gary was small enough to fit under the Bar top to help reach and hot weld the vinyl seams.
Carpet fitters must first set up carpet ensuring matching of pattern between both widths of carpet before seaming together.